Star Tent - 6m - Full Colour Sublimation Print

STEP BY STEP INSTRUCTION FOR STAR TENT

The canopy and frame are shipped separately to avoid damage. Please allow approx 1-2hours minimum for the 1st time you setup, please note the time will vary depending on number of people and the sta tent size. We recommend 3 people minimum for single peak star tents and 6 people minimum for double peak star tents.

Step 1:

Remove canopy and poles from boxes, be careful not to cut into the canopy when opening.

Step 2:

Double check the positions of the ground spikes are correct. This is critical to ensure your Starshelter looks its best so please take extra time at this stage as it will reduce the chance of you having to re- position the ground spikes.

Step 3:

Lay a dust sheet or cover on ground and lay the Starshelter canopy out, approximately positioning the centre area of the centre spike and the feet over each ground spike.

Step 4:

Assemble the poles following the guide provided.

Step 5:

Move the pole under the canopy and locate the top part into the receiving area at the top of the canopy, then, making sure at least two people do this, lift the canopy up.

Note: If your ground stakes were not marked out correctly or the ground is uneven, you may need to adjust the position of the ground stakes to get the correct tension.

HOW TO TAKE DOWN

Step 1:

Disconnect the feet from the ground spikes. Lay dust sheet/cover down.

Step 2:

Remove the canopy from the poles and dry out if required then fold and re-pack into bag.

Step 3:

Dismantle the pole(s) and re-pack into bag. Using the ground spike remover remove all the ground spikes.